| |
 |
• THX Ultra2 certified
• 250 watts rms per channel into 8 Ω, all channels driven
• 400 watts rms per channel into 4 Ω, all channels driven
• 385 watts rms per channel into 2 Ω, all channels driven
• 700 watts rms bridged into 8 Ω or 4 Ω mono
• 45 amps peak current per channel
• Impedance selector switch for 2 Ω operation
• Bridging switch for stereo or mono operation
• A/B speaker terminals with individual on/off
• 18dB/octave high pass filter, switchable 20Hz or 40Hz
• Fully discrete circuitry with toroid transformers
• Efficient, low heat design
• DC Servo and relay protection circuits
• Automatic on/off by DC trigger with looping output
• Automatic on/off by audio signal with adjustable sensitivity
• Gold-plated RCA input jacks
• Heavy duty 24k gold-plated 5-way speaker terminals
• Rear-mounted gain controls; ground lift switch
• 115/230v selector on rear panel
• Standby, channel status, high temperature indicators
• 3u chassis with carry handles; RMK33 rack mount kit available
• (W x D x H): 17.25” x 18.5” x 6” / 5.25 ” without feet
• Parasound 3 year parts, 3 years labor warranty
(For USA and Canada purchases only)
|
- Continuous RMS Power Output
20 Hz - 20 kHz, Both Channels Driven
250 watts x 2, 8 Ω
385 watts x 2, 4 Ω
250 watts x 2, 2 Ω
- Continuous RMS Power Output
20 Hz - 20 kHz, Bridged Mono
600 watts, 8 Ω
600 watts, 4 Ω
- Current Capacity
45 amps peak per channel
- Frequency Response
20 Hz - 50 kHz, +0/-3 dB, 1 watt
- Dynamic Headroom
1.6 dB
- Total Harmonic Distortion
0.02% at full rated output
0.015% at average listening levels
- IM Distortion
0.05 %
- Transient IM Distortion
Not measurable
- S/N Ratio
114 dB at rated output, IHF A-weighted
106 dB at rated output, unweighted
93 dB at 2.828 V output, IHF A-weighted
84 dB at 2.828 V output, unweighted
- Input Impedance
33 k Ω
- Input Sensitivity
1 V for 28.28 V out, THX standard
- Inter-Channel Crosstalk
85 dB, 1 kHz
73 dB, 10 kHz
67 dB, 20 kHz
- Damping Factor
Over 150 at 20 Hz
- Auto Turn On - DC
9 - 12V, 15 mA
- Auto Turn On - Audio
1.2 mV - 12 V, adjustable
15 minute turn off delay
- AC Power Requirement
110 - 120 V / 220 -240 V, 50 - 60 Hz
3 watts standby; 1000 watts full output
- Dimensions
17-1/4" Wide
18.5" Deep
6" High with feet, 5.25" without feet
- Net Weight
43 lbs, 19.6 kg
- Rack Mount Accessory
May be Purchased Separately
RMK33
|
Shift + Click any thumbnail to open image in a new window
 (577x185)
|
|
Large view (2440x784)
|
|
 (577x198
- displayed above)
|
|
Large view (2912x1000)
|
|
 (577x201)
|
|
Large view (2760x960)
|
|
KEY |
 |
Product Manuals,
Manual Appendices, Product Brochures |
 |
Product
Frequently-Asked-Questions |
 |
Remote Control
Software, RS-232 Codes |
 |
Software
Updates |
|
|
|
