Zamp • Quattro Four Channel Dual Zone Amplifier
Parasound Z
Zamp • Quattro
- 4 channels in the same size as a Zamp v.3
- 50 watts RMS x 4 @ 8 Ω, all channels driven
- 90 watts RMS x 4 @ 4 Ω, all channels driven
- Class AB input stage plus premium Class D power stage
- Speaker level input for integration with any stereo receiver, even w/o pre outs jacks
- Bus for looping Zone 1 to Zone 2
- Ultra-sensitive audio trigger for automatic turn on
- 12v trigger input for automatic turn on
- Powered 12v output to trigger other devices
- Loop output for sending audio to another amplifier
- Level controls for each channel
- Detachable phoenix style speaker connectors
- Unique half-rack width chassis; 1 rack space high
Power Output - All Channels Driven
50 watts RMS x 4, (20 Hz - 20 kHz, 8 Ω)
90 watts RMS x 4, (20 Hz - 20 kHz, 4 Ω)
Frequency Response
10 Hz - 60 kHz, +0/-3 dB
Total Harmonic Distortion
< .05 % at typical listening levels
< 1 % at full power
Interchannel Crosstalk
70 dB at 20 kHz
Input Sensitivity:
700mv = Full output (50 Watts @ 8 Ω)
Total Gain = 29 dB (Level controls set to Maximum)
S/N Ratio
> 112 dB, input shorted, IHF A-weighted
DC Trigger Requirements
+9 Vdc to +12 Vdc, 2 mA
Audio Trigger Requirements
1 mV AC (Quieter setting)
10 mV AC (Louder setting)
AC Power Requirement:
600 Watts Maximum
50 Watts Typical
15 Watts Idle
0.5 Watts Standby
110-130 VAC 60 Hz or 220-240 VAC 50 Hz
Note: AC mains voltage is set only by qualified electronics technician.
Dimensions:
Width (Black): 9.5" (241 mm) - Rack Mount Face Plate
Width (Silver): 8.5" (220 mm) - Non-Rack mount Face Plate
Depth: 10" (254 mm)
Height, with feet: 2" (51 mm)
Height, without feet: 1.75" (45 mm)
Weight:
Net: 4.5 lbs (2.0kg)
Shipping: 7.5 lbs (3.4kg)
Rack Mount Accessory:
SBS: Side by Side Mounting bracket, purchased separately
Zblank: Panel extender, purchased separately
Inside Ci (Nov. 2013)
"Easy control, bullet-proof operation and high-quality output make it
an easy solution to recommend."
