| Product Lines > Discontinued Products > PAL-380 Precision Architectural Loudspeaker: | |||
|
The PAL-380s were developed using the finest loudspeaker and crossover components available. Countless hours of computer modeling were spent to insure accurate audio reproduction in a variety of installations where placement compromises must sometimes be made. The PAL-380 Precision Architectural Loudspeakers deliver the high-fidelity audio reproduction you have come to expect from high-end loudspeakers in a cabinet. Please take a few minutes to read these instructions thoroughly to make the installation easier and insure optimum performance.
FEATURES
- 8" cast frame, long throw Kevlar cone woofer with powerful Strontium magnet, acoustic phase plug, and dust screen
- 2" soft dome midrange utilizes ferrofluid damping/ cooling, powerful Neodymium magnet and anti-diffraction ring
- 1" aluminum dome tweeter utilizes ferrofluid damping/ cooling, powerful Neodymium magnet and anti-diffraction ring
- Pivoting acoustically sealed tweeter/midrange sub-chamber
- Mirror-imaged driver array on rigid "floating" baffles
- Three position level controls for treble and midrange
- Two position level controls for mid-bass
- 24k Gold "Constant Pressure" 10 AWG push terminals
- Knockout plug for installing infrared receiver
- Parasound's 10 years parts, 5 years labor warranty
SPECIFICATIONS
- Frequency Response:
36 Hz-22 kHz +/- 2 dB - Nominal Impedance:
6 Ω - Minimum Impedance:
4 Ω - Sensitivity 1 Watt/1Meter:
89 dB - Power Range:
10-100 Watts - Woofer:
Size 8" - Cone Material:
Kevlar - Surround Material:
Polyurethane - Tweeter Size/material:
2 " Aluminum Dome - Tweeter Assembly:
Pivoting Dual-Chamber for Lower Crossover Points - Crossover Frequencies:
500 Hz, 2.4 kHz - Crossover Slope:
12 dB per octave - Dimensions:
Hole Cut-Out 8-5/8" x 12-3/4"
Outer Edge of Frame 10" x 14" - Optional Accessories Rough-In Kit:
NC/K-8M
DOWNLOADS