| Product Lines > Discontinued Products > PAL-80 Precision Architectural Loudspeaker: | |||
|
The PAL-80, PAL-65, and PAL-45 Precision Architectural Loudspeakers were developed using the finest driver and crossover components available. Countless hours of computer modeling were spent to insure accurate audio reproduction in a variety of installations where placement compromises are sometimes unavoidable. The PAL-80, PAL-65, and PAL-45 are virtually identical in operation and installation, except that the larger woofers provide more extended low frequency response and higher power handling capability.
FEATURES
- 8" long throw, dual voice coil Kevlar cone woofer with efficient Strontium magnet, and dust screen
- Dual 3/4" Aluminium dome tweeters that utlize ferrofluid for damping/cooling and powerful Neodymium magnets
- Switchable mono or stereo operation
- Three position tweeter attenuation control
- 24k Gold "Constant Pressure" 10 AWG push terminals
- Phase coherent, dual-mode crossover
- Four-point, spring-loaded "dog-leg" mounting system
- Acoustically transparent, fine mesh grill with paint shield
- Parasound's 10 years parts, 5 years labor warranty
SPECIFICATIONS
- Frequency Response:
48 Hz-22 kHz +/- 2 dB - Nominal Impedance:
8 Ω - Minimum Impedance:
6 Ω - Sensitivity 1 Watt/1Meter:
89 dB - Power Range:
10-100 Watts - Woofer Size:
8" - Cone Material:
Kevlar - Surround Material:
Mutli-layer Polyurethane - Tweeter Size/material:
Dual 3/4" Aluminum Dome - Crossover Slope:
12 dB per octave - Dimensions:
Hole Cut-Out 9 3/8"
Outer Edge of Frame 10 3/4"
DOWNLOADS