P 7

  • Input/Outputs:
    - 2 Multi channel (7.1) inputs for surround sound movies and music
    - 7 Stereo inputs (one balanced XLR input)
    - 1 MM or MC phono input
    - Front panel input jack for portable MP3 player
    - Unbalanced RCA and balanced XLR 7.1 outputs
    - Subwoofer output with analog bass management
    - Serial port for RS-232 control
    - Rear panel IR input jack
    - 3 different 12v trigger outputs
    - High quality headphone output

  • Software Features:
    - Custom input naming for all inputs
    - Theater bypass mode for connecting a digital surround receiver
    - Source input level matching
    - Headphone level offset
    - Analog bass management for stereo inputs
    - Links to Parasound Zhd HDMI selector (does not decode audio)

  • Other Features:
    - Relay-switched input select, mute & tone control engage/bypass
    - Full-featured remote control
    - Bass and Treble adjustable by remote
    - Tone controls engage/bypass by remote
    - Left/Right balance adjust by remote
    - Front/Rear balance adjust by remote
    - Subwoofer output level trim by remote
    - 20 dB partial mute and full mute by remote
    - 5 brightness settings for front panel display
    - Three 12V trigger outputs for 3 different functions
    - 12V trigger can be activated by remote control
    - Rack mount kit available, (2 rack spaces without feet)

Frequency Response:
5 Hz - 100 kHz, +0/-3 dB

Total harmonic distortion:
< 0.006% at 20 kHz

S/N ratio:
> 110 dB, input shorted, IHF A-weighted
> 95 dB, input shorted, unweighted

Cross-talk:
85 dB at 20 kHz

Line Input Impedance :
Unbalanced: 14.2k Ω
Balanced: 4.7k Ω per leg

Phono Input Impedance :
MM setting: 47k Ω
MC setting: 100 Ω

Output Impedance :
Unbalanced: < 60 Ω
Unbalanced: < 60 Ω per leg

Input Sensitivity:
200 mV for 1 V output
Total Gain: 14 dB (Volume limiter set to 110)
Maximum Output: 8 V (Vol. Limiter set to 110)

XLR Pin Identification:
1 = Ground (Shield)
2 = Positive
3 = Negative

AC Power Requirement:
100 - 250 V / 50 - 60 Hz (voltage is automatically selected)
10 watts standby
65 watts when turned on

Dimensions:
Width: 17-1/4" (437 mm)
Depth: 13-3/4" (350 mm)
Height, with feet: 4-1/8" (105 mm)
Height, without feet: 3-1/2" (89 mm)

Weight:
Net: 13.5 lbs. (6.1 Kg)
Shipping: 20.5 lbs. (9.3 Kg)

Rack Mount Accessory:
HRA 2 (May be purchased separately)

hidden image used for preloading purposes; ignore hidden image used for preloading purposes; ignore hidden image used for preloading purposes; ignore hidden image used for preloading purposes; ignore hidden image used for preloading purposes; ignore hidden image used for preloading purposes; ignore hidden image used for preloading purposes; ignore